How do I clean OOLER?

  • Pour 1 packet of Chili System Cleaner into the unit you are cleaning. If you are cleaning more than one unit, each unit gets their own packet of solution.
  • Access your OOLER app and press the cog in the upper right hand corner to get to the Device Settings Page.

mceclip1.png

  • Once on the Device Settings Page you will want to click "Start Deep Clean". This will bring up a box that details how long the process will take (45 minutes) as well as some other information, please see below. 

mceclip2.pngmceclip3.png

  • The system will go through this protocol which as you can see above takes 45 minutes. After this has been completed you can drain both the unit and the pad of the water with the cleaning solution in it. 


Have more questions? Submit a Request